cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr

Ask Me Anything – How to Enable Network Connectivity to Remote Workers
288
Views
0
Helpful
3
Replies
Highlighted
Beginner

Cisco AP 3702i and 3502i configurations

I need help configuring my AP for home use... I figured the AP has a lightweight software on it and I have not been able to do anything with it. Please help. I need to use this for home use...

Everyone's tags (1)
3 REPLIES 3
Highlighted
Hall of Fame Master

Re: Cisco AP 3702i and 3502i configurations

Well, if it has a lightweight image, you will need to have the ability to download the autonomous image for that ap. That requires a support contract. There is no other was to covert that ap.
-Scott
*** Please rate helpful posts ***
Highlighted
Beginner

Re: Cisco AP 3702i and 3502i configurations

Thanks a lot...  I was able to download the K9w7 and loaded through TFTP but the AP keeps loading the k9w8

Highlighted
Participant

Re: Cisco AP 3702i and 3502i configurations

When you say you 'loaded through TFTP' do you mean you simply copied the .tar file onto the flash or you actually installed it?
To be clear - in order to install the software on an AP you need to use the command:

archive download-sw tftp://A.B.C.D/<k9w7-image>.tar
That downloads the tar file, extracts the contents to flash and sets the boot variables to use the new image on next reload.
Is that what you did?
What is the output of show boot?

 

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey