cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

320
Views
0
Helpful
2
Replies
Highlighted
Beginner

Cisco Wireless CoAP IoT Discovery protocol

Hello Community,

i have a Challenge, i use a Wireless Virtual Controller with 3600 Access Points. Version 8.5.135.

Now, i will add Shelly IoT Devices (shelly.cloud) to a separate SSID. The IoT Devices are able to connect to the SSID i am also able to manage the devices via webserver but i am not able to discover These devices for adding These devices in a app. For discovery the app uses coap, but it is not working in a normal Cisco wireless Environment.

Has anybody an idea, what the issue is?

 

 

Thanks

 

Markus

Everyone's tags (4)
2 REPLIES 2
Rising star

Re: Cisco Wireless CoAP IoT Discovery protocol

I did see this mentioned about CoAP:

CoAP is designed for use between devices on the same constrained network

 

From that I would gather that the devices and server need to be on the same VLAN at least.

 

 

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
Beginner

Re: Cisco Wireless CoAP IoT Discovery protocol

You'll need to check the spec for that protocol but I'd be wondering:
- does it require multicast - if so do you have multicast enabled?
- sounds like the app operates as peer-to-peer so you'll have to disable client isolation (noting the security implications of course).
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards