Cisco Wireless Controller 2504 Firmware 7.4 - ipv6 SLAAC not working

[Arthur Kant]

Hey gang in lab I am trying to get SLAAC for ipv6 working for a single client and not having success.  I can statically setup ipv6 global addresses on my test client and hit my gateway no problem.  When I plug in wired I can pull SLAAC addresses all day from our internal router which makes me thing I dont have something configured correctly on the controller.  I am using 7.4.121.0 firmware with 1142N AP's

Is SLAAC for clients supported for pre 8.0 code?  Am I missing something really dumb here?

[Rasika Nayanajith]

For IPv6, best option is AireOS 8.0 onward code.

Regarding 2504, it may not support all advanced IPv6 features due to its memory/cpu limitations.

Here is the release notes for 8.1 which is the latest

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn81.html

HTH

Rasika

*** Pls rate all useful responses ***

[Arthur Kant]

Thank you for the response and information..  I am unable to make the jump 8.0 + yet and need to get some type of ipv6 working with 7.4 if possible.  From this link it says SLAAC should be supported.  I am still perplexed on why no love :(  

http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113427-cuwn-ipv6-guide-00.html