Your question is one that is often asked by customers and folks here on the forums. You may already know, that each SSID you add you create additional traffic utilization on the network. Most dont consider this and think since you can have 16 WLANs its ok! But not the case. I try to keep my customers at 5 or 6 when they insist at having the 1 mb PHY mandatory. However, i do have customers with 7 or 8 SSIDs with the 1 and 2 meg rates disabled. And their network utilization is at 10% or so ...
I hope this helps! If so please rate the post ... much appreciated ...
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
Community Live- Understanding How Multicast Works with Cisco Wireless LAN Controllers
(Live event - formerly known as Webcast- Tuesday November 19, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event will have place on Tuesday 19th, Novembe...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
New Version for the Wireless Lan Config Analyzer: v.4.4.14
Supports AireOS up to 8.8, any model.
Error parsing AP list with location with spaces
For tool information:
Trying every method to convert a AIR-CAP1702I-A-K9 AP from Lightweight to Autonomous and am having no success whatsoever. I connect the Ethernet cable to the PoE port on the back of the AP and straight to my laptop. I then configure the Laptop...