cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr

Ask Me Anything – How to Enable Network Connectivity to Remote Workers
1987
Views
10
Helpful
1
Replies
Highlighted
Beginner

client association syslog message with 5500 wlc

Hi!

It is a Customer requirement to send 802.11 client association/disassociation logs to the Syslog server in a Unified Wireless system. (AIR-CT5508 + LAP1142)

With Autonomous APs it was easy; just send the following messages with the correct severity level:

*Mar  1 00:31:35.220: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   xxxx.xxed.5c2c Associated KEY_MGMT[WPAv2 PSK]

*Mar  1 00:31:55.861: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station xxxx.xxed.5c2c Reason: Sending station has left the BSS

Unfortunately I didn't find such logs even in Msg Log with the severity level set to debugging.

I was able to do client assoc/disassoc logging with SNMP trap + trap receiver software, BUT is there any way to do this with Syslog?

Thanks,

Andras

Everyone's tags (5)
1 REPLY 1
Highlighted

Re: client association syslog message with 5500 wlc

Anras:

Those info (like you mentioned) are sent to the SNMP trap receiver, not to Syslog. (you can choose what traps to send and you can select 802.11 association)

However, i don't know if changing the facility level to "Syslog" in WLC's logging config will change anything ( i don't think it will do anything but you can try it).

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

Rating useful replies is more useful than saying "Thank you"
CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey