03-13-2019 07:25 AM - edited 07-05-2021 10:02 AM
Hi Guys,
Need your help on this.
I am managing CIsco 2504 WLC and i have configured P2P Blocking Action in SSID.
My requirement is two users connected to that SSID , do not need to communicate.
After configuring P2P Blocking in that SSID , Users connected to Same AP are not able to communicate with each other.
But when Users moves to differnet AP. ex. One user remains there on previous AP and second user moves to different AP with same IP address then they are able to communicate with each other.
Can you please guide me what configuration is required to avoid this?
03-13-2019 07:31 AM
03-13-2019 09:36 AM
hi,
it is flexconnect local switching
03-13-2019 09:37 AM
WLC is running with version 8.2.170
03-14-2019 08:33 AM
03-13-2019 07:55 AM
Hello,
If you apply a standard acl on your core or firewall will solve your problem?
like:
acl 1 deny ip 1.1.1.1 0.0.0.0 2.2.2.2 0.0.0.0
apply it on interface or vlan
Regards,
03-13-2019 07:58 AM
03-13-2019 09:40 AM
L3 for user is configured on firewall.
If i have 10.162.10.0/24 subnet then how and in firewall , where to apply ACL?
03-14-2019 11:07 AM
03-14-2019 08:15 PM
HI,
here subnet is only one so what will be source address and destination?
03-15-2019 05:01 AM
03-15-2019 08:12 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide