10-10-2016 12:25 AM - edited 07-05-2021 05:56 AM
Hi community,
I have a cisco air 702l AP and I want to reconfigure this AP into a repeater. Ist a Controller based one, so is it possible?
Solved! Go to Solution.
10-10-2016 12:23 PM
If you want to configure AP as repeater, you need to convert it as autonomous AP first. Then you can configure it as Repeater.
See below post that may help you to get is done ( I assumed you will use this AP without a WLC)
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
https://mrncciew.com/2013/01/20/autonomous-ap-repeater/
HTH
Rasika
*** Pls rate all useful responses ***
10-10-2016 12:23 PM
If you want to configure AP as repeater, you need to convert it as autonomous AP first. Then you can configure it as Repeater.
See below post that may help you to get is done ( I assumed you will use this AP without a WLC)
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
https://mrncciew.com/2013/01/20/autonomous-ap-repeater/
HTH
Rasika
*** Pls rate all useful responses ***
10-11-2016 04:16 AM
thanks a lot for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide