cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
312
Views
0
Helpful
2
Replies
Highlighted
Beginner

Creating Mobility Groups with 4402

I'm looking to place three production 4402 controllers into the same mobility group.  There are currently no mobility groups.  My question is, will this affect clients somehow when I add the controllers to the same group?  I'm pretty sure not, but I just wanted to make sure.

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Creating Mobility Groups with 4402

Yes, you're right, it'll not harm the client.

#Mobility group is useful for smooth Roaming, Anchoring and AP fallback. WLC reboot is not required to add/configure Mobility.

#If you've similar wlan configured on all these 3 WLCs and clients were trying to do roaming, it probably doing failover roaming with dhcp delays. Since it is already harming those client, feel free to configure Mobility.

#If the APs on those 4402s shares the RF then be sure to configure similar RF groups to avoid each APs idetifying themselves as Rogues.

View solution in original post

2 REPLIES 2
Highlighted
Cisco Employee

Creating Mobility Groups with 4402

Yes, you're right, it'll not harm the client.

#Mobility group is useful for smooth Roaming, Anchoring and AP fallback. WLC reboot is not required to add/configure Mobility.

#If you've similar wlan configured on all these 3 WLCs and clients were trying to do roaming, it probably doing failover roaming with dhcp delays. Since it is already harming those client, feel free to configure Mobility.

#If the APs on those 4402s shares the RF then be sure to configure similar RF groups to avoid each APs idetifying themselves as Rogues.

View solution in original post

Highlighted
Beginner

Creating Mobility Groups with 4402

Awesome.  Thanks for the help!

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey