'Default Mobility Domain Name' for Anchor WLC needs to be mandatorily different from Foreign WLC?
It is understood that as per the design guide , security wise it is a best practice to have 'Default Mobility Domain Name' for Anchor and Foreign WLCs as separate. However functionality wise will it be an issue if it is chosen to have same 'Default Mobility Domain Name' on Anchor and Foreign WLCs.
Re: 'Default Mobility Domain Name' for Anchor WLC needs to be mandatorily different from Foreign WLC?
I agree with Raskia.... it will work with the same MGN, but in actuality, you should keep it different. You don't want certain configurations to be shared to a guest anchor controller. Changing the anchor to just have _anchr at the end would differentiate the MGN. You would just need to update the mobility group members to reflect any changes.
IntroductionFeatured ExpertQ: Does switch port support uplink the mac-sec link?Q: Will the older 16.10/16.12 IOS XE SD-WAN (stand-alone) images be maintained for a specific amount of time going forward? Will these stand-alone code branches receive mainten...
This is a two-step process.
Step 1: Need to add the FlexConnect AP to a FlexConnect Group.Step 2: Need to configure a FlexConnect ACL (to specify the local traffic-of-interest), and map it to that FlexConnect Group.
For step 1----------As in the i...
Hello , We faced issues with Cisco AnyConnect when trying to connect at home network. we have 2 scenarioScenario 1: one home network and Cisco AnyConnect gives "limited or no connectivity" error messageScenario 2: multiple networks and Cisco An...
Hello, We're running WLC 9800-40 with version 16.12.2t with SFP-10G-LR-S. I have some questions regarding SFP-10G-LR-S:1. Is this model supported by Cisco? If not Which model do you recommend for WLC9800-40?2. Would SFP-10G-LR-S cause issues with upg...
Hello, I just received my new 240ac access point!I tried to configure it twice now but each time I set the IP to be static I can wait more than an hour and it is still flashing 3 colors. Last time I lost my patience and after 30min I reset...