cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

217
Views
0
Helpful
3
Replies
Highlighted

does a 2504 WLC support mobility group with WiSM1 on 6500 Series

if a 2504 WLC support mobility group with WiSM1 on 6500 Series.

Model: WLC 2504
Software version: 7.3.101.0

Model: WiSM1
Software verion: 7.x.x.x

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Community Legend

Yes and no.  Yes, mobility is

Yes and no. 

 

Yes, mobility is supported.  

 

No because I personally won't recommend inter-controller roaming.  This is more true when you're dealing with 4400/WiSM-1.  This is even more true when you've got WLC running two (or more) different codes.  

Hall of Fame Master

Leo is right... yes and no:) 

Leo is right... yes and no:)  It's always better to have the WLC's on the same code, but they do support it:

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#pgfId-149658

-Scott
*** Please rate helpful posts ***
3 REPLIES 3
Hall of Fame Community Legend

Yes and no.  Yes, mobility is

Yes and no. 

 

Yes, mobility is supported.  

 

No because I personally won't recommend inter-controller roaming.  This is more true when you're dealing with 4400/WiSM-1.  This is even more true when you've got WLC running two (or more) different codes.  

Thanks Leo. Could you please

Thanks Leo. Could you please provide cisco support document that says it is supported. I have been looking around the Cisco website for this but somehow not finding one. 

Hall of Fame Master

Leo is right... yes and no:) 

Leo is right... yes and no:)  It's always better to have the WLC's on the same code, but they do support it:

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#pgfId-149658

-Scott
*** Please rate helpful posts ***
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards