09-16-2019 03:08 AM - edited 07-05-2021 11:00 AM
We are trying to deploy a wlan network for the clients to support for EAP-PEAP.
There is no RADIUS/Active directory will be used here.
In this case, can the certificate be directly installed on the cisco WLC and Cisco WLC will act as authentication server(enablement of PSK ).
If yes, then which steps to be followed to upload the certificate?
09-16-2019 03:51 AM - edited 09-16-2019 03:52 AM
Check this guide:
https://mrncciew.com/2013/04/21/configuring-local-eap-on-wlc/
Regards
Dont forget to rate helpful posts
09-16-2019 05:33 AM
Thank you.
The provided links are very useful.
I am looking for the certificate to be installed only on the WLC. The client devices will have to use user credentials to connect to the said WLAN. Would this work in this case?
09-16-2019 06:06 AM
it will work but i nevered really tested it...
More info here:
https://mrncciew.com/2013/04/22/configuring-eap-tls-on-wlc/
Best case would be to have ISE(Radius server) , AD
Regards
Dont forget to rate helpful posts
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: