07-17-2013 05:11 AM - edited 07-04-2021 12:26 AM
Hi everyone,
Does the client segment should have the reachability to the external web server (like ISE) or the anchor controller will get the web page and give it to the client..?
Solved! Go to Solution.
07-17-2013 05:23 AM
You need to allow access to the ISE. That is why you need to use pre auth ACL's.
Sent from Cisco Technical Support iPhone App
07-17-2013 05:23 AM
You need to allow access to the ISE. That is why you need to use pre auth ACL's.
Sent from Cisco Technical Support iPhone App
07-17-2013 05:34 AM
Many thanks for your quick response.
Is there any possibility to configure the WLC to get the redireted page from the ISE and send it to client when the client is not having reachability to ISE..?
07-17-2013 05:37 AM
No
Sent from Cisco Technical Support iPhone App
07-17-2013 05:40 AM
Short and crisp answer...
Thanks a lot once again Scott
07-17-2013 05:42 AM
Haha... It's how it's designed. The WLC isn't a relay for any type of external web redirect.
Sent from Cisco Technical Support iPhone App
07-17-2013 05:46 AM
Yep.. I got it now .. We face the same issue here.. unable to get webpage from ISE due to non-reachability from the client. We will have to route it and check then
07-17-2013 06:18 AM
This might help explain it better:
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bba10d.shtml#topic13
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: