cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1755
Views
5
Helpful
3
Replies

guest anchor across different versions

Darren Lynn
Cisco Employee
Cisco Employee

Hi all,

I'm looking for information on the issues that could arise or what the impact is of a guest anchor between WLC's with different versions.

There is a 4400 in the core running 7.0 and a 2504 in a branch running 7.2. I need to extend a web auth guest SSID to the branch.

7.2 is required because of 2602 AP's.

Looking for information and experiences.

Cheers
Darren

Sent from Cisco Technical Support iPhone App

1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame
Hall of Fame

Here is a compatibility matrix

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp102554

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

3 Replies 3

Scott Fella
Hall of Fame
Hall of Fame

You should be fine. I have clients with a mix of 4400's and 5508's with different versions.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Scott Fella
Hall of Fame
Hall of Fame

Here is a compatibility matrix

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp102554

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Darren Lynn
Cisco Employee
Cisco Employee

Thanks Scott.

I found that same link.

Sent from Cisco Technical Support iPhone App

Review Cisco Networking products for a $25 gift card