cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1193
Views
5
Helpful
2
Replies

How to upgrade an Aironet 3602e from Autonomous to Lightweight???

Alvaro Rugama
Level 1
Level 1

Hi everyone

Hope you can help me with this. I have an Aironet 3602e that was bought as a Lightweight AP, last week need to do some testing and changed the image to an Autonomous one. Now I need to use it with a Controller, but can´t find the procedure to upgrade it to Lightweight again.

I tried the procedure of the upgrade tool, but it saids that this AP is nos supported.

Anyone who has this information please. I already had the Lightweight images.

Best Regards

Alvaro Rugama

1 Accepted Solution

Accepted Solutions

Sandeep Choudhary
VIP Alumni
VIP Alumni

HI Alvaro,

For the LWAP conversion, use the recovery image. We can use this command on the autonomous AP priviledge mode.

AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/image.tar

Regards

Hope it helps.

View solution in original post

2 Replies 2

Sandeep Choudhary
VIP Alumni
VIP Alumni

HI Alvaro,

For the LWAP conversion, use the recovery image. We can use this command on the autonomous AP priviledge mode.

AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/image.tar

Regards

Hope it helps.

Thank you very much sandeepchoudhary21

It is working right now

Best Regards.

Alvaro Rugama

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: