11-11-2013 08:45 AM - edited 07-04-2021 01:14 AM
Hi everyone
Hope you can help me with this. I have an Aironet 3602e that was bought as a Lightweight AP, last week need to do some testing and changed the image to an Autonomous one. Now I need to use it with a Controller, but can´t find the procedure to upgrade it to Lightweight again.
I tried the procedure of the upgrade tool, but it saids that this AP is nos supported.
Anyone who has this information please. I already had the Lightweight images.
Best Regards
Alvaro Rugama
Solved! Go to Solution.
11-11-2013 09:10 AM
HI Alvaro,
For the LWAP conversion, use the recovery image. We can use this command on the autonomous AP priviledge mode.
AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/image.tar
Regards
Hope it helps.
11-11-2013 09:10 AM
HI Alvaro,
For the LWAP conversion, use the recovery image. We can use this command on the autonomous AP priviledge mode.
AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/image.tar
Regards
Hope it helps.
11-11-2013 09:33 AM
Thank you very much sandeepchoudhary21
It is working right now
Best Regards.
Alvaro Rugama
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: