I have the same problem with 5.1.151 version as a module in WS-C6506-E and a IPservices image 12.2(18)SXF14. It reloads frecuently when I`m configuring it, and some time with out doing nothing. The mapping are losed when the wism reloads.
I have an other WiSM module installed in a 6500 vss and 12.2(33)SXI IOS. The WiSM have the same version 5.1.151 and this one works perfect.
I suspect in a 6500 version, but I still have no time to upgrade
QuestionI have the following Air AP:Air-AP1562I-B-K9, 802.11ac outdoor access point There are three antenna cables that go from the inside cover to some soldered connections on a PCB. When removing the cover, two of the soldered antenna connections c...
QuestionHiWe have a guest access set up and was wondering what exactly are the sequence of events from connecting to SSID to being granted internet access, see below steps I'm unsure of are left blank1. connect o SSID through AP2. traffic hits Foreign WLC...
Model:C9120AXI-Q Install EWC on C9120 running with CAPWAP as shown in the attached log, but the installation fails.It looks like you're getting an error like out of storage space.Is there any good way?