Is Native VLAN ID for flexconnect be unique in the WLC?

[Hai Nguyen]

Can I assign the same native VLAN ID to flexconnect APs that live at different remote sites?

For example:

Site A:

Native VLAN ID 100

Network Address: 172.16.1.0/24

Site B:

Native VLAN ID 100

Network Address: 192.168.1.0/24

On the WLC:

All APs that are belong to both sites have Native VLAN ID set to 100 in flexconnect configuration section.

Would the same Native VLAN ID supported on the WLC for FlexConnect APs from different sites?

Thank you!

[Andy Wallington]

Definitely. Flexconnect allows the APs to locally switch traffic at their site independently of the WLC.

[Hai Nguyen]

Thank you very much for the clarification Andy!