cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
493
Views
0
Helpful
7
Replies

LAP-1262 to C2504 join loop

antony_pan
Level 1
Level 1

Hi:

i have two 1262

one is join ok

but one join loop              

7 Replies 7

Scott Fella
Hall of Fame
Hall of Fame

When I run into an issue like that, I usually would either upload a different recovery image or concert it to autonomous and then back to lightweight.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Wow. it seems the abnormal behavior with the AP join issues are more common than what one can expect.

Rating useful replies is more useful than saying "Thank you"

Rating useful replies is more useful than saying "Thank you"

Amjad Abdullah
VIP Alumni
VIP Alumni

Hi,

Make sure the date and time is correct on the controller.

I can see from your screenshot that the AP goes to CFG state which means the join is OK.

Please check again and provide txt format, not screenshot of the logs.

Check also the logs and traplogs on the controller if it tells anything.

Regards,

Amjad

Rating useful replies is more useful than saying "Thank you"

Rating useful replies is more useful than saying "Thank you"

Amjad,

I have seen AP's get into the CFG and then it fails to complete and goes back in a loop. Usually it's a corrupted recovery image and replacing that has always been the fix for me, since I play around with beta codes and that seems to mess up my AP's:)

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

I did that once with 1522 AP that took my whole day tryin got understand where the problem is. But the recovery image solved that. But it is a headahce to console to an outdoor AP. Those who deal only to indoor APs should know they are lucky. ;-)

Rating useful replies is more useful than saying "Thank you"

Rating useful replies is more useful than saying "Thank you"

Scott Fella
Hall of Fame
Hall of Fame

Is is the conversion process

Using a TFTP Server to Return to a Previous Release

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: