08-01-2011 12:01 AM - edited 07-03-2021 08:30 PM
Hello, i'd like to force the speed/duplex of the integrated Gigabit interface on a LAP1042N, managed by a 4402 running software version 7.0.98 but I cannot find the command either by command line or on the GUI. Could someone help me? Many thanks! cheers
Solved! Go to Solution.
08-01-2011 03:11 AM
Hi,
Here is the command which should be given from the WLC CLI..
The command is
config ap ethernet duplex
Example
config ap ethernet duplex half speed 1000 CISCOAP1
Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra
08-01-2011 03:11 AM
Hi,
Here is the command which should be given from the WLC CLI..
The command is
config ap ethernet duplex
Example
config ap ethernet duplex half speed 1000 CISCOAP1
Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra
08-01-2011 03:38 AM
Hi Surendra, thanks for your quick reply, it works fine now.
Best regards
Theo
08-01-2011 06:24 AM
thats nice to hear!! thanks for using CSC!!
have a great day!!
Regards
Surendra
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide