cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
355
Views
14
Helpful
4
Replies
Participant

LMS and WLC compatibitlity

Hi all,

We have LMS 3.2.1 and WLC version 7.0.116. I want WLC syslog to be managed by LMS. How can i acheive that..? Any special package need to applied for LMS ..? Please help.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Master

Re: LMS and WLC compatibitlity

Well you can always point WCS syslog to any syslog server. Why not just look at Prime infrastructure. It is the new WCRs/NCS platform with LMS built in.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Master

Re: LMS and WLC compatibitlity

Well you can always point WCS syslog to any syslog server. Why not just look at Prime infrastructure. It is the new WCRs/NCS platform with LMS built in.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

Highlighted
Participant

LMS and WLC compatibitlity

Hi Scott,

Thanks for your reply. Currently we are running with LMS only. In future we would possibly convert it into PI.

Highlighted
Hall of Fame Master

Re: LMS and WLC compatibitlity

Just speak with your SE. PI is great for the wireless side but isn't 100% migrated with LMS but should be soon.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Highlighted
Rising star

Re: LMS and WLC compatibitlity

Hello Prasan,

As per your query i can suggest you the following solution-

Please refer to the LMS and WLC compatibility guide for managing the WLC syslog through LMS.

For more information refer to the link-

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html

Hope this will help you.

CreatePlease to create content
Content for Community-Ad