05-18-2016 07:26 AM - edited 07-05-2021 05:04 AM
Cisco Wireless mobility express doesn't support mac filtering ?
1. how to configure mac filtering on Wireless mobility express (cisco air-ap 1830)
2. how to add bunch of MAC address using web GUI Or CLI
thanks..!
Solved! Go to Solution.
12-20-2016 04:49 AM
Any solution for this.
12-20-2016 04:49 AM
Any solution for this.
01-17-2017 12:30 PM
Currently we can't configure it using the GUI, we expect to support this in 8.4
01-17-2017 09:30 PM
Thank you prpineda,
By when would the 8.4 be released.
Also for adding the MAC ID via CLI, should the WLAN be in disabled state. Below is the command.
"
config macfilter add MAC_address wlan_id
01-19-2017 12:20 PM
We expect to have this release available by march
01-19-2017 10:07 PM
Thanks prpineda,
Cd u plz help with below query;
"for adding the MAC ID via CLI, should the WLAN be in disabled state ?"
05-14-2020 05:55 PM
Could you help me this matter, I can't using MAC filtering on Aironet2802I
1. I enable MAC filter, but it show me Local MAC address is empty
2. Does we need to Disable the WLAN before enable MAC filter and add the MAC address because I enable and added when WLAN is enable so it's not working right.
05-15-2020 04:04 AM
WLAN gets reconnected while changing authentication mode. Can you share a screenshot of the error.
01-17-2017 12:27 PM
Currently we can't configure MAC filtering on the GUI, only CLI using the commands mentioned in this document.
Issue the config wlan mac-filtering enable wlan_id command in order to enable MAC filtering. bEnter the show wlan command in order to verify that you have MAC filtering enabled for the WLAN.
config macfilter add command:
The config macfilter add command lets you add a macfilter, interface, description, and so forth.
Use the config macfilter add command in order to create a MAC filter entry on the Cisco Wireless LAN controller. Use this command in order to add a client locally to a wireless LAN on the Cisco Wireless LAN controller. This filter bypasses the RADIUS authentication process.
config macfilter add MAC_address wlan_id [interface_name] [description] [IP address]
We expect to support this feature on the GUI for 8.4
12-01-2017 01:26 AM
Hi prpineda,
I am now using ME version 8.5.105.0. Could you guide on adding the MAC addres via GUI
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide