Maximum Cabling distance between AIRONET 2500 SERIES and AP
Which will be the maximum cabling distance between antenna AIR-ANT2544V4M-R and Access Point Model AIR-CAP2602E-N-K9??
I'm trying to connect these equipment to the IDF which is 180m far from the AP/Antenna location. My plan would be to connect the AP at 90m from the IDF and the antenna at 90m from the AP but I want to be sure that the antenna will work. I will use AMphenol TWB4001 coaxial cable for cabling between Antenna and AP.
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
New Version for the Wireless Lan Config Analyzer: v.4.4.14
Supports AireOS up to 8.8, any model.
Error parsing AP list with location with spaces
For tool information:
Trying every method to convert a AIR-CAP1702I-A-K9 AP from Lightweight to Autonomous and am having no success whatsoever. I connect the Ethernet cable to the PoE port on the back of the AP and straight to my laptop. I then configure the Laptop...
The Ap lose ip static, we thought the Ap was not able to communicate with the WLC with assigned static IP address. When this happens the ap will fall back ti trying ti get a DHCP address.This occur randomly in platform controller 2504 with AP's model AIR-...