mesh deployment with wlc2504 and 1500 ap

[chandru.j]

Hi Everyone,

   I am implementating wlc 2504 and 1520 ap,i installated wlc and ap are got registered. In WLC i changed parameter as RAP and MAP.

   As per doucment i have to enable Zero touch configuration in bridging. But bridging option is not their in wlc, wlc is running on 7.0.220 anyone help us.

[Saravanan Lakshmanan]

check

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mesh.html#wp1542630

[Amjad Abdullah]

Hi,
Zero touch configuration? This is a very old thing on very old code versions.

I think you need to read a more recent document. This one is what you need I guess:

http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.0/design/guide/MeshAP_70.html

HTH

Amjad

[jkilleda]

Hi Chandrasekar,

Refer the configuration guide below.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01000111.html