Migrate 1522AG Mesh APs to new WLC on upgraded doe
I have to migrate a pair of 1522AG access points, a RootAP and a MeshAP. Both are currently associated to a WiSM1 running 7.0 code. I need to migrate them to a 5508 running 220.127.116.11 code. What is the best approach to ensure that both access points associate to the upgraded WLC without stranding the MeshAP?
QuestionI have the following Air AP:Air-AP1562I-B-K9, 802.11ac outdoor access point There are three antenna cables that go from the inside cover to some soldered connections on a PCB. When removing the cover, two of the soldered antenna connections c...
QuestionHiWe have a guest access set up and was wondering what exactly are the sequence of events from connecting to SSID to being granted internet access, see below steps I'm unsure of are left blank1. connect o SSID through AP2. traffic hits Foreign WLC...
Model:C9120AXI-Q Install EWC on C9120 running with CAPWAP as shown in the attached log, but the installation fails.It looks like you're getting an error like out of storage space.Is there any good way?