cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
659
Views
0
Helpful
4
Replies

Mulitple SSIDs and ACLs on Autonomous APs

This is an unusual situation:

I have the need to run a few autonomous APs (1262) for some sites on satellite links.

At a bare minimum I need to run two WLANs.

One is wide open, and the other with an ACL that heavily restricts access.

Is there any way to tie two WLANs to a single VLAN, while applying an ACL to just one WLAN?

Any ideas?

1 Accepted Solution

Accepted Solutions

You would need to setup multiple vlans. Here is a doc regarding autonomous and ACL's.

https://supportforums.cisco.com/docs/DOC-13768

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

4 Replies 4

Scott Fella
Hall of Fame
Hall of Fame

On autonomous, you cans have multiple ssid pointing to one vlan.  You can on a WLC.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

Kind of figured that.

I guess I will have tpo deploy another VLAN/Subnet...

I take it that I can run an extended ACL on an autonomous AP and apply it to the dot11 radio subinterface?

You would need to setup multiple vlans. Here is a doc regarding autonomous and ACL's.

https://supportforums.cisco.com/docs/DOC-13768

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: