cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1318
Views
0
Helpful
5
Replies

narrow DCA Channel List on flexconnect 7500

Sun-Gi Kim
Level 1
Level 1

Dear all,

I have problem with flexconnect 7500 and 1140AP that can not be utilized ample channel list.

only flex7500 DCA Channel List are 149, 153, 157, 161.

would you let me know how can I use 36,44,52,60 ... so many channels available in KR country code.

그림1.png

thanks

regards,

Sungi Kim

5 Replies 5

Scott Fella
Hall of Fame
Hall of Fame

If you have multiple country codes configured on the WLC, the common power and channel setting for all the configured country codes will apply.  That means that if one country only allows those 4 channels, all the AP's can only use those four channels.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

Configured Country Code(s) is KR.

Total with DFS must be 21.

No multiple country codes.

I don't understand why only have 149, 153, 157, 161.

thanks

I don't know.. You have a link that states what channels are available for KR?

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Are you sure your controller supports kr ? What is the part number of your controller and your aps ? The full part number ..

Sent from Cisco Technical Support iPad App

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

controller is AIR-CT7510-K9, and all flexconnect AP are AIR-LAP1142N-K-K9.

thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: