Not sure if this is a bug or not, but whenever I try to enable Flexconnect Local Auth at the SSID level, I get the following "The following errors occurred while updating the WLAN: Flexconnect Local Authentication is not supported with Local Switch Central DHCP." I do have local switching on the Flexconnect, but I do not have "Switch Central DHCP." I then created a Flexconnect Group and enabled "Enable AP Local Authentication"and No Central DHCP, then palced the APs into that Flexconnect Group, but still seeing "%DOT1X-3-INVALID_REPLAY_CTR" in the WLC syslog while clients roam.
I have two questions:
Why can't I enable Flexconnect Local Auth per SSID?
How can I determine that Flexconnect Local Auth is actually enabled and working?
WLC version is 126.96.36.199 (multiple controllers 8510s and AIR-CT2504-K9S - happens on all them)
3 SSIDs, two in Flexconnect mode
APs receiving DHCP from local switch
Flexconnect clients receiving DHCP from same local switch
Clients for tunnel SSID receiving DHCP from central server
Security has become one of the greatest concerns for every company alike. The industry is moving towards a fast paced and customer-oriented network infrastructure which automatically increases the vulnerabilities a network is exposed to. As the industry t...
We got some new Apple Macbook Air, when connected to wifi, we found the link speed was only 54Mbits, but other laptops like DELL or Panasonic were working fine, the link speed was at least 800 Mbits. we are using Cisco WLC 5504 and 2702I ap.and the funny ...
In today’s world where business needs to be up and available 24X7, one of the major challenges faced by a lot of companies is the seamless uptime of their network infrastructure. Any company’s primary focus is always on keeping its infrastructure ready fo...
As a network administrator keeping up with the methods of today is more challenging, and not relying solely on traditional ways of configuration and management is demanding. APIs have become a buzz word, and supporting it shows that your de...
We’re looking for network operators and engineers to complete a 2-minute icon preference study.
The icon choice will help us better represent information on a Cisco software product.
Click here: https://ciscoux.az1.qualtrics.com/jfe/form/SV_6saOh5...