ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2464
Views
0
Helpful
2
Replies
Highlighted

Problem with WLC 5508 Roaming with iPhone

First of all greetings to all in the community.

The problem I am running is in the roaming phones mainly iphone, which I have them in a SSID also serves to data connection of other devices which has the following security policy [WPA + WPA2] [Auth (802.1x )]

WLC: 7.0.98.0

iphone: V6.0 OS

jabber: v9.02.20078

For DCA parameters were configured channels 1,6 and 11. I'm testing with a floor where there are 2 APs and AP normal users are 10 to 13 connected devices, also reviewed in each AP channel where an AP is on channel 1 and the other is in the channel 6.

I was able to capture the following errors in the APs.

Exhibits some show on catches.

Appreciating your valuable help, I say goodbye

2 REPLIES 2
Highlighted
Beginner

Problem with WLC 5508 Roaming with iPhone

Hi Armando,

Refrence this bug:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCta91836

Also recommend upgrading your 5508s firmware

Highlighted
Hall of Fame Community Legend

Problem with WLC 5508 Roaming with iPhone

[WPA + WPA2]

iPhones don't like choices.  You either run WPA or WPA2.  Don't try to run both and presume the iDevice can decide because they won't.

Content for Community-Ad