12-07-2005 08:46 AM - edited 07-04-2021 11:23 AM
Hi,
I've been working with a wireless network, where ap 1200 are being used as repeaters and ap1300 are being used as root.
Sometimes, some of them get hanged, and must be reset.
The software version of the ap's is 12.3(7)JA2.
Here I attach a crash-info file, it might help.
Thanks in advance.
12-13-2005 07:14 AM
Did you make sure that all the devices are running the latest version of the firmware. Because even if one of the APs are running a old version of the firmware there is every possibility that this can happen.
12-16-2005 12:19 AM
Hi,
Thanks for your answer about this issue.
I've confirmed that all access points are running the latest firmware version (12.3.(7)JA2).
I don't know what could be the cause of the problem.
The ap are working with channels 1, 6, 11. So I think that the problem is not interferences.
I would thank any other suggest.
Regards.
12-16-2005 11:27 AM
Are they all connected to the same power feed? are you using power over Ethernet?
Try to downgrade at least one repeater to a previous firmware and try again.
cheers,
P.
12-22-2005 03:19 AM
Hi,
All the ap's are using power over ethernet.
Please, can you explain me about the downgrade you are talking about? Which is the purpose?.
Thanks in advance.
Regards.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: