Radio Interface Resets.

[srihari_rgda]

Hi,

we have found a specular error on the radio interface of the Access Point.

Errors on the Radiso Interface area as below.

Dot11Radio0 is up, line protocol is up

47575 output errors, 0 collisions, 4 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

Please Help me up.

Regards

SRIHARI

[irisrios]

Reset indicate number of tims interface has been reset. This happens when th packet queued for transmission is not sent within specified seconds. This might be due to a cable problem on serial line or malfunctioning modem that is not supplying transmit clock signals.

[srihari_rgda]

Thank you Dear,

But this problem araises on all the AP's that are in the network. so this cannot be a cable problem. What could be reason.

if the radio interfaces are reset frequently what could be the cause.

Regards

Srihari

[IGBarrere]

Are all your access points operating on the same channel? It sounds like some sort of malformed packets that they may be receiving...