04-15-2020 11:38 AM - edited 07-05-2021 11:56 AM
Hello there. Anyone have any ideas why my 2 3602e's are not showing linktest results? I am using them for a P2P bridge with a config I have used in the past. It could be a bug with the IOS version or a command I am missing. The configs are pretty basic and they can ping each other. Not sure why this is happening.
HippieBridge#ping 192.168.0.238
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.238, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
HippieBridge#sh dot11 associations
802.11 Client Stations on Dot11Radio0:
SSID [MichaelNET2] :
MAC Address IP address IPV6 address Device Name Parent State
8875.5657.c2a0 192.168.0.239 :: bridge CasaBridge01 self Assoc
HippieBridge#term mon
HippieBridge# dot11 dot11Radio 0 linktest packet-size 1000 count 1000
Start linktest to 8875.5657.c2a0, 1000 1000 byte packets
HippieBridge# show dot11 linktest
No response from 8875.5657.c2a0
HippieBridge#
04-15-2020 01:50 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide