cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
234
Views
0
Helpful
2
Replies
Highlighted
Beginner

secondary 3504 WLC controller loses GW reachability once HA is UP (SSO)

The issue is the Secondary controller keeps losing gateway reachability once the HA is up, you can see that in the logs.
Both Controllers connected to 9500 Core with virtual stack, each WLC having a separate port channel, while the two WLCs are separate ( not in SSO ) both are fine, once the HA is up and the secondary took the primary IP, it will mention gateway reachable failure.
Thanks, Anas *--* Please rate the useful post,its free ;) *--*
Everyone's tags (4)
2 REPLIES 2
Highlighted
VIP Mentor

Re: secondary 3504 WLC controller loses GW reachability once HA is UP (SSO)

would you be able to post "show interface summary" from these two units ?

 

HTH

Rasika

Highlighted
Hall of Fame Community Legend

Re: secondary 3504 WLC controller loses GW reachability once HA is UP (SSO)

What firmware are the controllers running on?
What firmware is the 9500 running on?
CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey