ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
292
Views
0
Helpful
2
Replies
Highlighted
Beginner

secondary address on BVI - 1310 ios 12.3(4)JA

int BVI1

ip address 10.0.1.1 255.255.255.0

ip address 10.1.1.1 255.255.255.0 secondary

Need the radio int on a different network from the ethernet int. Planned on using a secondary address on the BVI int.

I've had no luck adding a secondary address to the int BVI1. CLI accepts the string, but the entry is never added to the config. Anyone with ideas about what I'm missing?

2 REPLIES 2
Highlighted
Beginner

Re: secondary address on BVI - 1310 ios 12.3(4)JA

I have exactly the same issue on a 1200 AP. Peter did you get a solution?

Highlighted
Beginner

Re: secondary address on BVI - 1310 ios 12.3(4)JA

Try this - it seems to create a second instance of the BVI 1 interface.

ap#conf t

Enter configuration commands, one per line. End with CNTL/Z.

ap(config)#int bvI 1:0

ap(config-if)#

ap(config-if)#ip address 10.2.2.2 255.255.255.0

ap(config-if)#end

ap#sh ip int brief

Interface IP-Address OK? Method Status Protocol

BVI1 192.168.54.1 YES NVRAM up up

BVI1 10.2.2.2 YES manual up up

both addresses can be pinged

Content for Community-Ad