Slow Throughput when traversing management interface
Hello CSC World!
I've got an interesting issue happening in a wireless environment where wireless throughput slows down to a crawl when I set WLAN's to use the management interface on the WLC.
When my test network is associated with the management interface, I get between 1-3 Mbps of speed (tested with iPerf and Speedtest.net).When I add it to another interface that is associated with a vlan I get 20-25 Mbps of speed verified with the same tests as before. I am using the same device to connect to the network, on the same AP, and I can't think of why this would be occurring.
If anyone has come across an issue like this and would like to share their experience, I would greatly appreciate it.
QuestionI have the following Air AP:Air-AP1562I-B-K9, 802.11ac outdoor access point There are three antenna cables that go from the inside cover to some soldered connections on a PCB. When removing the cover, two of the soldered antenna connections c...
QuestionHiWe have a guest access set up and was wondering what exactly are the sequence of events from connecting to SSID to being granted internet access, see below steps I'm unsure of are left blank1. connect o SSID through AP2. traffic hits Foreign WLC...
Model:C9120AXI-Q Install EWC on C9120 running with CAPWAP as shown in the attached log, but the installation fails.It looks like you're getting an error like out of storage space.Is there any good way?