cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

220
Views
5
Helpful
1
Replies
Highlighted
Beginner

Trouble setting Cisco 3702i to autonomous

Hello,

I only did this a few weeks ago and it was easier, but today I can't reset another spare AP and set it to autonomous.  I was originally connected to our WLC so I've consoled in and removed the config.txt and the private-multiple-fs anre rebooted:

But my command to add the correct firewall doesn't work am I in the wrong mode?

archive download-sw /overwrite /reload tftp://192.168.1.23/ap3g2-k9w7-tar.153-3.JI5.tar

The archive download-sw command isn't even available.  

Other Wireless - Mobility Subjects, Aironet Access Points

AP1.PNG

Any ideas?

Thanks

1 REPLY 1
VIP Mentor

Re: Trouble setting Cisco 3702i to autonomous

Hi Andrew,

Try "debug capwap console cli" command first & then do archive download command.

Refer below

https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/ 

 

HTH

Rasika

*** Pls rate all useful responses ***

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards