Two autonomous 1142 need to bridge and repeat

[PTalanoa3]

I have two buildings and need to create a wireless bridge with 2 1142 autonomous access points. At the remote building I would like to use the 5 ghz radio for the bridge and have clients connect to the 2.4 radio. I have had a tough time trying to get this to work.   

[Prabath Godevithanage]

Hi,

It is possible and it has been answered here and also here you'd find good information.I'd suggest you to compare your config.What's the exact issue you are facing?any errors?

Cheers.

Prabath

[PTalanoa3]

The first link returns a 404 error. The second looks like what I need. could you repost the first link please. 

Thanks!!!

[Prabath Godevithanage · Accepted solution]

sure,here it is with another one.there are quite a few out here,search for workgroup bridge or wgb.What stage are you at the moment?have you converted your 1142 APs to autonomous mode already?if not see here

Feel free to post any errors you are getting

https://supportforums.cisco.com/discussion/11724001/cisco-ap1142-autonomous-bridge-wireless-clients

https://supportforums.cisco.com/discussion/12417701/autonomous-ap-repeater-client-access-backhaul-ssid

[PTalanoa3]

Yes I have loaded the autonomous code for these access points. Now im going over the links you provided to check my config.

Thanks!!