Unable to get DHCP IP for WLAN

[febryoponcosulistyo]

Hi all,

With all due respect I would like to ask 

I have this topology 

I connect by using ssid that has been set on the WLC but I am not able to get the dhcp IP for wlan user vlan 272 and 288 

any suggestion would be appricated so much 

thank you 

[Sandeep Choudhary · Accepted solution]

can you run these commands on WLC for a clinet and paste the output here!!

debug client <Mac address>
debug dhcp message enable

Regards

Dont froget to arte helpful posts

[febryoponcosulistyo]

Hi Sandeep

Thank you 

but there is no output after running that command on WLC CLI

Thank you

[Deepak Kumar]

Hi,

Where is the DHCP server? Have you configured IP Helper-address command on switch for getting IP from the DHCP server (If DHCP in the different VLAN)?

[febryoponcosulistyo]

Hi Deepak

Thank you for responding :)

I dont use dhcp server

the dhcp pool I set on Switch Border Atas (middle Multilayer Switch) I set Ip Dhcp pool for the AP and the WLAN, the AP's are able to get dhcp IP for their managements but once I connect to ssid I didnt get IP for the WLAN that I set before on the MLS

Thank you

[Deepak Kumar]

Hi,

A few questions to get more details:

1. SSID is tunneled to WLC and WLC is having correct VLAN mapping for this SSID?

2. Is this SSID VLAN trunked on the WLC management VLAN?

3. If you assigning a static IP on the client, then are you getting the Internet or Ping from the core switch?

[febryoponcosulistyo]

Hi Deepak

sorry for late response

These are my answer according to your checking questions : 

1. SSID is tunneled to WLC and WLC is having correct VLAN mapping for this SSID? Yes

2. Is this SSID VLAN trunked on the WLC management VLAN? Yes

3. If you assigning a static IP on the client, then are you getting the Internet or Ping from the core switch? No I am not able to ping

Need more insight please ;( 

Thank you :)

[Sandeep Choudhary · Accepted solution]

HI,

could you please paste the output of these commands:

show interface detailed management

show interface detailed <dynamic interface name>

Regards

Dont forget to arte helpful posts