cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
544
Views
0
Helpful
6
Replies
Highlighted

WCS 7 report client count by Vlan missing

Hi,

  Although I have root access on WCS I dont see the following options:

VLAN

Client MAC Address

Client Username

Anybody knows what´s wrong ?

Best regards.

6 REPLIES 6
Highlighted
Hall of Fame Master

Re: WCS 7 report client count by Vlan missing

Is your WCS version equal or higher than your WLC version?

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Highlighted

Re: WCS 7 report client count by Vlan missing

Hi Scott,

  Thanks in advanced!

Follows the WCS and WLC versions:

WCS version : 7.0.172.0

WLC version: 6.0.202.0

Model: AIR-CT5508-k9

We have a situation which users have not been able to access the network and we suspect that is due a IP lack on the Vlan. As the APs are organized by AP group/Vlans, it is hard to see how can I better divide users in other Vlan  to solve it. Reports by floor area is not accurate in this case. We do believe that Reports by Vlan will point out where we need to change.

Your help will be very appreciated !

Thanks a lot.

Highlighted
Hall of Fame Master

Re: WCS 7 report client count by Vlan missing

Well if clients can't connect or if dhcp is unavailable, you will not see any of that info. You might want to upgrade to 7.0.235.5 which allows for interface groups. This way you can bundle subnets together and apply these bundled subnets to your ap groups. See the link below

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b78900.shtml

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Highlighted

Re: WCS 7 report client count by Vlan missing

Hi,

  Upgrade the controller is not  possible right now but What I am referring to is that on the WCS 7 I  have this options under  : Client > Client Sessions >Client  Sessions Report Detail

-Controller

-Floor Area

-Outdoor Area

-AP by Floor Area

-AP by Outdoor Area

-AP by RAP Mesh Role

and on WCS 6 shown on this video:

Creating Reports (Overview), Cisco WCS 6.0 (June 11, 2009)

We can see three more option:

–VLAN

–Client MAC Address

–Client Username

That´s my question. Why I can´t see that ?

By Vlan whould  be a great repots for us !

Thanks.

Highlighted
Hall of Fame Master

WCS 7 report client count by Vlan missing

Are you AP's in local mode?

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
Highlighted

WCS 7 report client count by Vlan missing

Hi,

Yes. Local mode.

CreatePlease to create content
Content for Community-Ad