11-10-2013 09:20 AM - edited 07-04-2021 01:14 AM
I am wondering which Cisco autonomous APs can operate as wireless bridges (station role root and non-root)? Particularly interested in 1602E and 2602E APs. The documentation I've looked at so far doesn't specifically state that it is/is not supported.
Solved! Go to Solution.
11-10-2013 02:17 PM
Yes, these model you can configure as Root/Non-Root as long as you have an autonomous image loaded. Most of the time feature is depend on the software code.
Release notes available at below URL for details of the supported/unsupported features of each software version.
http://www.cisco.com/en/US/products/ps12555/prod_release_notes_list.html
Here is one basic config example of Root/Non-Root using different AP model, but it may help you to get basic config done for these AP model as well.
http://mrncciew.com/2013/11/09/wireless-bridge-with-eap-fast/
HTH
Rasika
**** Pls rate all useful responses ****
11-11-2013 01:28 PM
Yes these AP's 1600 and 2600 may definetly.. work as root and non oot bridge..
11-10-2013 02:17 PM
Yes, these model you can configure as Root/Non-Root as long as you have an autonomous image loaded. Most of the time feature is depend on the software code.
Release notes available at below URL for details of the supported/unsupported features of each software version.
http://www.cisco.com/en/US/products/ps12555/prod_release_notes_list.html
Here is one basic config example of Root/Non-Root using different AP model, but it may help you to get basic config done for these AP model as well.
http://mrncciew.com/2013/11/09/wireless-bridge-with-eap-fast/
HTH
Rasika
**** Pls rate all useful responses ****
11-11-2013 01:28 PM
Yes these AP's 1600 and 2600 may definetly.. work as root and non oot bridge..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide