cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
981
Views
16
Helpful
7
Replies
Highlighted
Beginner

wIPS and Cisco 1552e

Hi Experts,

Is the Cisco 1552e in LWAPP mode supposed to support wIPS?  The option is greyed out on my 2504 WLC

Version 7.4.100.60

AIR-CAP1552E-N-K9

no wips.jpg

7 REPLIES 7
Highlighted
Cisco Employee

Issue the below command..

config ap mode flexconnect submode


Regards
Surendra BG
Highlighted

Thanks, but no cigar.

Result pretty much as expected. I've raised (yet another!!) wireless TAC case.

(Cisco Controller) >config ap mode flexconnect submode ?

none           No submode active for the Cisco AP.

pppoe-only     WIPS submode for the Cisco AP.

pppoe-wips     WIPS submode for the Cisco AP.

wips           WIPS submode for the Cisco AP.

(Cisco Controller) >config ap mode flexconnect submode wips ?

     Enter the name of the Cisco AP.

(Cisco Controller) >config ap mode flexconnect submode wips SB-AP-01

Unable to set submode. This AP model does not support WIPS submode.

(Cisco Controller) >

Highlighted
Beginner

What a crock!

Here's the reply from Cisco.

Where's that number for Avaya?

The 1552E does not support WIPS. I have checked the behavior in the lab as well and also internal documents.

Unfortunately, there is no external document stating the same explicitly.

Regards,

Priyanka

Highlighted

I hav reached out to the BU to check if this is in the roadmap.. We really appreciate ur patience... i guess we serve our customer better than any other company anyday..

Regarda

Surendra

Regards
Surendra BG
Highlighted

n yeah.. thanks for the rating much appreciated..

Regards

Surendra

Regards
Surendra BG
Highlighted
Cisco Employee

Highlighted
Cisco Employee

wIPS sub-mode is not supported on the 1530 or 1550 series access points.

A link to documentation can be found here:  http://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/7-6/design/guide/mesh76/mesh76_chapter_01.html#ID543

Content for Community-Ad