- two WLC 4404 located in different sites (site A and site B) with sw release 5.x
- a wireless mesh area that is linked to these two sites
- site A and site B are connected via L3 wired link
- routers that act as a default gateway for the client are located in site A and site B
Reading some whitepapers on Cisco website, I understand that I have to configure WLC-A as a primary controller and WLC-B as a secondary backup controller with different mobility groups but I dont' understand where to configure default gateway IP address for my wireless clients
How is a high availability configuration for the client connected to the wireless mesh area in this scenario?
Where should be configured the default gateway IP address for my wireless clients?
The Ap lose ip static, we thought the Ap was not able to communicate with the WLC with assigned static IP address. When this happens the ap will fall back ti trying ti get a DHCP address.This occur randomly in platform controller 2504 with AP's model AIR-...
Dear Friends, I have to upgrade IOS in 5520, here my question was how to identify which FUS was installed in the WLC.GUI ----Software Version 126.96.36.199Emergency Image Version 188.8.131.52 -------sh sysinfo Product Version....................
Security has become one of the greatest concerns for every company alike. The industry is moving towards a fast paced and customer-oriented network infrastructure which automatically increases the vulnerabilities a network is exposed to. As the industry t...
We got some new Apple Macbook Air, when connected to wifi, we found the link speed was only 54Mbits, but other laptops like DELL or Panasonic were working fine, the link speed was at least 800 Mbits. we are using Cisco WLC 5504 and 2702I ap.and the funny ...