cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1330
Views
0
Helpful
3
Replies

Wireless Client to Wireless Client access not working.

rcancel
Level 1
Level 1

I have a integrated Cisco Wism on my 6506. I'm running EIGRP. All networks see the wifi clients. Everything works great, except for sharing printers or pinging. I can ping from one wireless client to another, as long as they are not on the same site (i.e. LA to NY). If I try to ping a wireless client from a local wireless client (i.e. LA to LA), everything times out. It seems that if I access a wireless client from a wireless client within the same network, they don't see each other. However, wireless clients from one site can access wireless clients at another.

Any hints would be greatly appreciated!!

Thanks!

Reinaldo

1 Accepted Solution

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame

Go to WLAN > WLAN ID of your choice > Advanced Tab > and enable "P2P Blocking Action".

View solution in original post

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame

Go to WLAN > WLAN ID of your choice > Advanced Tab > and enable "P2P Blocking Action".

Thank you so very much!! It worked!!!

Thank you very much for the ratings.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: