wireless mobility engineer

[hamedwasel1]

Dears;

Recently, i have changed LAP (light weight access point) AIR-LAP1131AG  mode from local mode to bridge mode 

now, i am unable to find it on controller & surface led light becomes Blinking red-green-amber

please, help me to restore it to local mode .

thanks in advance

[Rasika Nayanajith]

What software version your WLC running ?

If it was 8.0.x you can try below as long as you have access to AP CLI

 capwap ap mode local

https://supportforums.cisco.com/document/12398556/converting-mesh-ap-local-mode-and-vice-versa-using-ap-cli

HTH

Rasika

[hamedwasel1]

thanks for your help ,,, i'll try