Wireless SSID's Remaining

[sajad majeed]

Is possible to rename one currently configured WLAN SSID's

[Rasika Nayanajith · Accepted solution]

No, You have to delete & recreate with the modified name.

HTH

Rasika

**** Pls rate all useful responses. Each time you rate a response Cisco will donate $1 to Kiva ****

[abwahid]

 Duplicate post, see below

https://supportforums.cisco.com/discussion/11591596/change-name-ssid-wireless-controller

[Abhishek Abhishek]

You have to delete the SSID and modify it.

[jmeachum · Accepted solution]

While you can not rename it you can delete and recreate it, as others have stated in this post and the one mentioned below. 

There is another way not mentioned by others, but this is not the quickest or easiest method either.  Transfer the configuration file off of the controller, open it in wordpad, edit the SSID name, and then load the configuration back into the controller.

I hope this helps.

John

[sajad majeed]

Correct................

[Rasika Nayanajith]

From WLC code 8.0 onward you can rename the SSID without deleting it & recreating. Here is the release notes of that code

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn80.html#16248

HTH

Rasika