cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr

Ask Me Anything – How to Enable Network Connectivity to Remote Workers
366
Views
5
Helpful
3
Replies
Highlighted
Beginner

WLC anchoring between 7.6.130 and 8.1.102 code

I have site that is quite small with only 20 access points on a 5505 controller. Any issues with upgrading this remote site 5508 to 8.1.102 and anchoring back to our central site 7.6.130 controller?

This would be a way for us to test the 8.1.102 code without rolling it out to any of our main site just yet..

3 REPLIES 3
Highlighted
VIP Mentor

You should not have any

You should not have any problem with this,unless some unknown bugs with this new code :)

HTH

Rasika

*** Pls rate all useful responses ***

Highlighted
Hall of Fame Master

Like Rasika mentioned, it is

Like Rasika mentioned, it is supported.  You can get that info from the compatibility matrix:

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#pgfId-149658

Since v8.1 is very new, it would be hard to say how well it works.

-Scott

-Scott
*** Please rate helpful posts ***
Highlighted
Cisco Employee

Yes, it is supported. You can

Yes, it is supported. You can test the 8.1.102 code without rolling it out to any of main site.Please mark the post as answered if it satisfies your query answer.

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey