Hi,
I would like to know the details about below mentioned logs and how to prevent this. Reporting the suddenly users are getting disconnected after receiving this message. I have checked on some document and found that need to do change on the RRM
56 Wed Jan 11 20:20:09 2017 AP's Interface:0(802.11b) Operation State Up: Base Radio MAC:00:xx:xx:xx:54:20 Cause=Radio channel set. Status:NA
57 Wed Jan 11 20:20:09 2017 AP's Interface:0(802.11b) Operation State Up: Base Radio MAC:00:xx:xx:xx:04:20 Cause=Radio channel set. Status:NA
58 Wed Jan 11 20:20:08 2017 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:xx:xx:xx:04:20 Cause=Radio channel set. Status:NA
59 Wed Jan 11 20:20:08 2017 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:xx:xx:xx:54:20 Cause=Radio channel set. Status:NA
60 Wed Jan 11 20:20:08 2017 AP current channel changed. AP MAC: 00:xx:xx:xx:04:20 (G-A01), slotId: 0, Old Channel: 11, New Channel: 1, Mode: automatic.
61 Wed Jan 11 20:20:08 2017 Channel changed for Base Radio MAC: 00:xx:xx:xx:04:20 on 802.11b/g radio. Old Channel: 11. New Channel: 1. Why: Signal Strength. Energy before/after change: -66/-61. Noise before/after change: -128/-128. Interference before/after change: -128/-128.
62 Wed Jan 11 20:20:08 2017 AP current channel changed. AP MAC: 00:xx:xx:xx:54:20 (G-A02), slotId: 0, Old Channel: 6, New Channel: 11, Mode: automatic.
63 Wed Jan 11 20:20:08 2017 Channel changed for Base Radio MAC: 00:xx:xx:xx:54:20 on 802.11b/g radio. Old Channel: 6. New Channel: 11. Why: Signal Strength. Energy before/after change: -44/-56. Noise before/after change: -80/-74. Interference before/after change: -50/-80.
