cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
453
Views
0
Helpful
1
Replies
Highlighted

Workgroup Bridge AP Roaming

Hello,

We have an issue that we could use some help with.

We have 5 workstations in a production environment. because the workstations consist of several network-connected devices, we deploy access points as work group bridges. So, the Wireless client is a AIR-CAP702W-A-K9 in autonomous mode as a work group bridge. The workstations move around the production floor, so they need to be able to connect to any of the APs.

In the ceiling we have 3 AIR-CAP2702E-A-K9 in lightweight mode. They are managed by a AIR-CT5508-K9 WLC.

The weird thing is that we have a tough time making sure that they 702s consistently connect to their nearest AP. We will go into WLC and see that a 702 is associated to an AP on the other side of the room. Or, we'll find that all 5 702s are associated to the same AP, even though it isn't the nearest one. This creates some intermittent performance issues.

My question is: are there any Cisco features available that will help them make smarter decisions about which AP they associate with?

Thanks

1 REPLY 1

You can take a look a this

You can take a look a this cisco document:

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1130-ag-series/113198-wgb-roam-config.html

Have a nice reading.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards