Hello Wes, in the VSOM 7 release notes here it what it says regarding Arecont cameras. I do not see where 6.3.2 supports Arecont.
AV5155 5MP IP camera 65202 H.264
MJPEG
Yes Yes No
AV10XX5 10MP IP camera 65202 H.264
MJPEG
Yes Yes No
AV2115 2MP IP camera 65202 H.264
MJPEG
Yes Yes No
10
AV20185DN and AV8185 models are 4-channel IP cameras. To support multiple video channels
from a single device, VSM 7 models these devices as Encoders. There are no validated H, M, or L
template settings for these devices in the VSIN templates. Custom settings must be used instead to
configure streaming settings.
The using the L quality setting for both streams in a dual stream configuration may result in poor
video quality.
VSM 7 allows H quality to be selected for both streams in dual-stream configurations for some
Arecont devices . However, this configuration is not supported by the cameras and may result in poor
video quality.
Arecont devices have not been qualified to support redundancy with this VSM release.
