dears:i have new CPAM, and i try to access it through my laptop, but no response? i know the default CPAM IP address is 192.168.1.2.on other hand i need the command to access cpam .thxsmadi
Dear All , I have more the 300 encoders that will be used for the analog cameras fixed and PTZ cameras, we used Cisco VS 1 port Encoder FE-GE Chassis Card (MPEG4/H.264) ,which installed in Cisco VS FE Chassis 3RU, 16 slots, Internal Dual Voltage Po...
Dear All,I am facing now a strange issue with 5 cameras (out of 340 ) cameras ,as I get Endpoint error ://(camera name ) Unreachable , I Tried to reboot and delete and add the cameras again but this did not solve the problem , also I made reboot from...
Hi folks, I was curious if anyone had been successful on creating a schedule using presets with their 2900 in VSM? I started messing around with it but could not really find a guide on how to do it. Thanks-Nick
Hi All, I have a large site that I wish to upgrade with minimal disruption. The site is live and has 9 gateways in total. Has anyone upgraded a large site before and what is the best method? I was thinking of upgrading the CPAM server first to 1.3.1....
"The maximum amount of time that an archive should be continuously marked as event data before event marking is disabled. The value should be entered in seconds and the range of values is between (1-86400). The default is 2 hours (7200 seconds). "Can...
Hi everyone,I'm just want to know if I can get a http stream from the video of a cisco civs ipc 4500.And if I can, how to do ?I get the rtsp stream but not the http stream and I need it for my C# application.Thanks for the help.
I'm having problems getting the timestamps to show up on the ops screen, shown below I can only geta grey box with nothing. Also below that on the playback, you notice a red box with an X on the left, I'm notsure what that is supposed to do or how t...
Endpoint error: cam unreachableProblem: Unable to view Bosh auto dome 300 on to the VSOM.Error Message displayed: Endpoint Error: Cam Unreachable.Software Versions: VSMS 6.3.1 VSOM 6.3.1, Camera Firmware 3.52Problem Description: Unable to view camera...
Hi. I am looking for a solution to backup the various VSMS configs automatically. I am able to it via the web interface, but this would not allow a regular automatic collection of the configs (similar like in the routing&switching busiiness). I found...
Hello, I have a windows 7 64 bit machine that the slider bar on the video pane will not display so you can't speed up or slow down the video. Upgraded from 6.3.1 to 6.3.2 didn't help, upgraded to ie9 same problem, found out ie9 is not supported in vs...
My customer is on the highest firmware of VSOM/VSMS (6.3.2) and I configured all the archives (86) to run for 30 days and shelve that archive for another 30 days, giving the customer 2 months worth of backups at all times. Once all configurations wer...
Hi,i have a Cisco ASA 5510 FIREWALL using in my Network.i want to upgrade the Flash menory to 512 mb please privide the steps to perform the upgarde.Thanks,Saroj
I have recieved this device and am wondering how it is registered or how it activates. there is no license or anything recieved when I purchase. so I do not know what is the procedure to acctivate the features.In the manual it says to get to the serv...
Got a curveball this morning. A customer wants to retrofit a badge reader for their elevator (2 story bld). Does anyone know of any restrictions on elevator controls? I plan to call the local fire marshal on the regulations but I am more interested i...
