12-20-2014 09:28 AM
Can port security be enabled on Trunk Ports? The Problem is whenever i enable port security on trunk ports, the port get is disabled, and after removing it, it starts behaving perfectly.
Please Suggest
Solved! Go to Solution.
03-09-2015 05:42 AM
Hi,
the port-security can´t enabled in trunk ports, because restricted de number of MACs. The better choice is mac access-list, with mac access group, for to configure MAC ACL, please visit:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0/security/configuration/guide/n1000v_security/security_9mac_acls.html
Thanks.
12-21-2014 11:19 PM
Any one having any idea about it?
10-05-2019 12:20 AM
03-09-2015 05:42 AM
Hi,
the port-security can´t enabled in trunk ports, because restricted de number of MACs. The better choice is mac access-list, with mac access group, for to configure MAC ACL, please visit:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0/security/configuration/guide/n1000v_security/security_9mac_acls.html
Thanks.
08-31-2020 02:06 PM
The following output illustrates how to enable port security on an interface and to configure a
static secure MAC address of 001f:3c59:d63b in VLAN 5 on a switch trunk port:
VTP-Server-1(config)#interface GigabitEthernet0/2
VTP-Server-1(config-if)#switchport
VTP-Server-1(config-if)#switchport trunk encapsulation dot1q
VTP-Server-1(config-if)#switchport mode trunk
VTP-Server-1(config-if)#switchport port-security
VTP-Server-1(config-if)#switchport port-security mac-address 001f.3c59.d63b vlan 5
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: